ABS vs ASA: which one should you use?
They print in a similar way, but they are built for different jobs. Here is how to choose.
The short answer
ASA is usually the better choice for parts that will spend long periods outdoors or exposed to sunlight. Choose ABS for indoor parts, especially if you plan to smooth them with acetone or want the widest choice of colors and brands.
Side-by-side
| ABS | ASA | |
|---|---|---|
| Sunlight & weather | Can yellow and get brittle with long sun exposure | Designed for improved UV and weather resistance |
| Heat resistance | Good, well above PLA | Good, similar to ABS |
| Enclosure | Strongly recommended | Strongly recommended |
| Warping | Prone to warping | Prone to warping; many people find it slightly easier than ABS |
| Fumes | Noticeable smell; ventilate | Noticeable smell; ventilate |
| Acetone smoothing | Yes | Yes, often with less dramatic results |
| Finish | Usually glossy to satin | Often a more matte finish |
| Availability & price | Very common, usually lower cost | Less common, usually costs a bit more |
What they have in common
Both are styrene-based plastics. ABS uses butadiene rubber for toughness. ASA swaps that for an acrylate rubber, which is the main reason it handles sunlight better. Because they are so similar, the same printer setup works for both: a hot bed, an enclosure, little or no part cooling, and good ventilation.
Choose ASA if…
- The part goes on a car, boat, garden, mailbox, or anything outdoors.
- You want colors to hold up in the sun.
- You prefer a matte look straight off the printer.
Choose ABS if…
- The part stays indoors.
- You plan to acetone-smooth or solvent-weld parts.
- You need a specific color or brand that only comes in ABS.
What about PETG?
If you don't have an enclosure or the part doesn't need the higher heat resistance of ABS or ASA, PETG is often easier to print and typically produces less noticeable odor. It is a good middle ground between PLA and ABS/ASA for many functional parts.